djfreemc 
Sponsor
Registration Date: 25-07-2003
Posts: 1,117
Helpfulness rating:
 |
|
the most simple solution is if your keyrig also has a midi out next to the usb thing, then you can connect it directly.
In the other case: connect your usb keyboard to your computer, the korg to the midi interface, and that one to another usb port. Also you will need to connect the line out of the korg to a line in of your computer if you want to be able to hear and record what you are doing.
Also make sure the correct drivers for your keyboard and midi interface are installed on your pc.
From then on, you can probably use any audio sequencer program of your liking.
set up your software something like this:
- ad one audio channel, and choose the line in you connected the korg to as input
- add one midi channel, set you keyboard as input and the correct port of the midi interface as output. Note that you may need to change the midi channels here, both in your software and on your hardware. Put them on the same channel, or you won't get a thing. Refer to your software help/ hardware manual on how to set these.
I hope this helps you a bit...
__
The mysteries of the distorted snare...
Can't win if u don't play
|
|
